Audio Technica AE3300 Vocal Microphone

For a truly professional microphone that provides excellent sound and build quality with low handling noise, many vocalists look to the AE3300 from Audio-Technica. The AE3300 features the same element as the high-end AT4033 studio condenser microphone, but the rest of it is all built specifically for live use. The goal is to bring a clean, studio sounding vocal to the stage and the AT3300 hits it right on the money.

Features:

• Exceptional performance for exceptional performers
• Same element as the classic AT4033 studio microphone
• Well-tempered polar pattern with outstanding rejection qualities
• Superior anti-shock engineering ensures low handling noise and quiet performance
• High-quality double-sided PCB uses surface-mount components. Extensive grounding plane and attention to best-practice grounding methods minimize electrical noise
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
• Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity
• Robust all-metal design for enduring dependability on the road
• Quiet-Flexâ„¢ stand clamp provides silent, flexible microphone positioning
• Integral 80 Hz HPF switch and 10 dB pad

Specifications:

• ELEMENT Fixed-charge back plate, permanently polarized condenser
• POLAR PATTERN Cardioid
• FREQUENCY RESPONSE 30-18,000 Hz
• LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
• OPEN CIRCUIT SENSITIVITY -42 dB (7.9 mV) re 1V at 1 Pa
• IMPEDANCE 150 ohms
• MAXIMUM INPUT SOUND LEVEL
  • 147 dB SPL, 1 kHz at 1% T.H.D.;
  • 157 dB SPL, with 10 dB pad (nominal)

  NOISE 19 dB SPL   DYNAMIC RANGE (typical) 128 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO 75 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS 11-52V DC, 3 mA typical SWITCHES

  • High-pass filter;
  • 10 dB pad (nominal)

  WEIGHT 10.6 oz (300 g) DIMENSIONS

  • 7.05″ (179.0 mm) long,
  • 1.97″ (50.0 mm) head diameter,
  • 1.30″ to 0.87″ (33.0 mm to 22.0 mm) tapered body diameter

  OUTPUT CONNECTOR Integral 3-pin XLRM-type ACCESSORIES FURNISHED:

  • AT8470 Quiet-Flexâ„¢ stand clamp for 5/8″-27 threaded stands
  • 5/8″-27 to 3/8″-16 threaded adapter
  • soft protective pouch

  *Cable Sold Separately

  •