,

Darkglass Alpha Omega AO200 200 Watt Bass Amplifier Head

$399.99

Darkglass Alpha Omega AO200 200 Watt Bass Amplifier Head

Availability: 1 in stock

SKU: AO200 Categories: ,

Darkglass Alpha Omega AO200 200 Watt Bass Amplifier Head

The Alpha·Omega 200 is slimmer and lighter than ever. Packed with Aux-in and headphone output for quiet practicing and an intuitive push potentiometer for the mute and master control. Pre/bypassed DI XLR Out with switchable ground lift making these amps reliable for all sorts of musicians with an ample array of possibilities.

Features

  • Input: Use this jack to connect your instrument via a standard ¼” mono cable.
  • Blend: Use this knob to mix between the Clean signal and the Distortion signal (Alpha·Omega Engine).
  • Treble: +-12dB at 5kHz. Use this knob to change the high content of the signal.
  • Drive: This knob controls the amount of distortion that the Alpha·Omega Engine will deliver. It will cover a wide range of overdriven tones from subtle break up to overly distorted sounds.
  • Bass: +-12dB at 80Hz. Use this knob to change the low-end content of the signal.
  • Master/Mute: Use this knob to control the overall volume of the amplifier. Use this push knob button to mute the amplifier.
  • Mod: Selects or mixes between the two distinct distortion circuits: Alpha is punchy, tight with a lot of definition, whereas Omega is simply brutal and raw.
  • Mids: +-12dB at 1kHz. This knob controls the mid content of the signal.
  • Dimensions: Width: 15 cm / 6″, Length: 15.7 cm / 6¼”, Height: 5.2 cm / 2″, Weight: 0.965 kg / 2.12 lb

Back Panel Features

  • Speaker Output: Use this connector to connect the amplifier to your cabinet. This Speakon combo jack allows for either Speakon or ¼” speaker cable operation.
  • Ground Lift: Use this control to lift the ground of the DI XLR output. If you are experiencing ground noise in your DI signal try changing the setting of this control.
  • DI Output: Use this connector to send your bypass signal to the console, mic preamp, interface, etc. The DI OUTPUT delivers only the bypass DI signal.
  • AC Socket: Use this connector to feed electric power to the amplifier. 100 – 230 VAC, 50-60Hz.
  • AC Power Off: Use this Switch to release the audio energy from your bass.
  • Outputs: 1 x SpeakON, 1 x XLR (direct out)
  • Headphone Output: Connect your Headphones and enjoy the analog cabinet emulation.
  • Aux In:Use this connector to play music from your laptop, phone, MP3 player, etc. This input is routed only to the headphone output without cabinet emulation.
Weight 2 lbs
Manufacturer

Reviews

There are no reviews yet.

Be the first to review “Darkglass Alpha Omega AO200 200 Watt Bass Amplifier Head”

Your email address will not be published. Required fields are marked *

Shopping Cart