, ,

Audio Technica U891RCX Push to Talk Boundary Condenser Microphone


Audio Technica U891RCX Push to Talk Boundary Condenser Microphone

Out of stock

<p>Designed to deliver easy, flexible control in conference and boardroom installations, the versatile U891R cardioid condenser boundary microphone features a touch-sensitive on-off switch that can be set to three modes: press-on/press-off, press to talk, and press to mute. The phantom-powered microphone is equipped with a unique PivotPoint™ rotating output connector and an LED status indicator. UniGuard™ innovations offer unsurpassed immunity from radio frequency interference; interchangeable elements are available in cardioid, hypercardioid and omnidirectional polar patterns; an 80 Hz low-cut UniSteep® filter reduces pickup of low-frequency ambient noise. The microphone’s heavy die-cast case and silicon foam bottom pads minimize coupling of surface vibration to the microphone. The unit’s self-contained electronics eliminate the need for an external power module.</p><p>* Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations<br />* Ultra-quiet electronic switch can be set to any of three operating modes: “touch-on/ touch-off,” “touch-to-talk” and “touch-to-mute”<br />* PivotPoint™ rotating output connector allows cable to exit from either the rear or the bottom of the microphone<br />* Superior off-axis rejection for maximum gain before feedback<br />* UniGuard™ RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)<br />* Small-diameter UniPoint capsule near boundary eliminates phase distortion and delivers clear, high-output performance<br />* Heavy die-cast case and non-slip silicon foam bottom pads minimize coupling of surface vibration to the microphone<br />* Low-profile design with low-reflectance finish for minimum visibility<br />* Available in two colors: black (U891R) and white (U891RW)<br /><br /><b>SPECIFICATIONS: </b></p><ul> <li>ELEMENT Fixed-charge back plate, permanently polarized condenser</li> <li>POLAR PATTERN Half-cardioid</li> <li>(cardioid in hemisphere above mounting surface)</li> <li>FREQUENCY RESPONSE 30-20,000 Hz</li> <li>LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave</li> <li>OPEN CIRCUIT SENSITIVITY –34 dB (19.9 mV) re 1V at 1 Pa</li> <li>IMPEDANCE 200 ohms</li> <li>MAXIMUM INPUT SOUND LEVEL 130 dB SPL, 1 kHz at 1% T.H.D.</li> <li>DYNAMIC RANGE (typical) 104 dB, 1 kHz at Max SPL</li> <li>SIGNAL-TO-NOISE RATIO 68 dB, 1 kHz at 1 Pa</li> <li>PHANTOM POWER REQUIREMENTS 11-52V DC, 4 mA typical</li> <li>SWITCHES Touch-sensitive control: on/off;</li> <li>Switch function: touch on/off, momentary on, momentary off;</li> <li>Flat, roll-off</li> <li>WEIGHT 9.3 oz (264 g)</li> <li>DIMENSIONS 4.25" (108.0 mm) long,</li> <li>3.31" (84.0 mm) maximum width,</li> <li>0.91" (23.0 mm) height</li> <li>OUTPUT CONNECTOR TB3M-type</li> <li>CABLE 25.0 (7.6 m) long, 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F and XLRM-type connectors</li> <li>OPTIONAL INTERCHANGEABLE ELEMENTS UE-H hypercardioid (100°);</li> <li>UE-O omnidirectional (360°)</li> <li>ACCESSORY FURNISHED Soft protective pouch</li></ul>

Weight 0.82 lbs

close out



There are no reviews yet.

Be the first to review “Audio Technica U891RCX Push to Talk Boundary Condenser Microphone”

Your email address will not be published. Required fields are marked *

Shopping Cart